Specifications
Turntable Section
- Drive System: Rotation-detection-type high-precision control belt drive
- Motor: DC motor
- Rotation Speed: 33-â…“rpm, 45rpm, 78rpm
- Wow and Flutter: 0.1% or less
- Platter: Acrylic, 30cm diameter
Tonearm Section
- Arm Type: Static-balanced S-shaped tone arm
- Effective Arm Length: 223mm
- Suitable Cartridge Weight: 3.0 to 12.0g (14 to 23g including head-shell)
- Overhang: 18mm
- Arm Height Adjustment Range: approx. 6mm
Cartridge Section
- Type: MM
- Output Voltage: 5.5 mV (1kHz, 5cm/s)
- Tracking Force: 1.8g
- Cartridge Weight: 7.2g
- Included Head-shell Weight: 11g (including screws, nuts, and wires)
- Replacement Record Stylus Model: Ortofon 2M Red
- Stylus lifespan depends on use conditions but is usually about 1000 hours
Phono Outputs
- Balanced
- Connector: XLR × 1 pair
- Unbalanced
- Connector: RCA × 1 pair
General
- Power: AC 100 to 240V, 50/60Hz (AC Adapter)
- Power Consumption: 2.0W or less (0.3W at Standby)
- Overall Dimensions:
- With Dust Cover Closed: 450 × 148 × 351 mm / 17.1″ × 5.8″ × 13.8″
- With Dust Cover Open: 450 × 420 × 410 mm / 17.1″ × 16.5″ × 16.1″
- With Dust Cover Removed: 450 × 135 × 351 mm / 17.1″ × 5.3″ × 13.8″
- Including protrusions (when arm holder at the highest position)
- Weight: approx. 10.5kg / 23.2 lbs.
Included Accessories
- 45RPM adapter × 1
- Counter Weight × 1
- Head-shell (Ortofon 2M Red installed) × 1
- Platter × 1
- Flat Belt × 1
- Pulley Cover × 1
- Dust Cover × 1
- Hinge × 2
- Foot height adjustment washers × 4
- Arm height adjustment hex wrench × 1
- RCA Audio Cable × 1
- Ground wire × 1
- AC Adapter (GPE018S-120100-Z) × 1
- Cartridge Alignment Gauge × 1
- User Manual × 1