SPECIFICATIONS
- POWER 300 watts RMS per channel into 8 ohms
- MONO OUTPUT 1000 watts RMS into 8 ohms 1800 watts RMS into 4 ohms
- FREQUENCY RESPONSE 20Hz to 20kHz ±0.5dB -3dB at 70kHz
- DISTORTION <0.03% THD at rated power
- CURRENT OUTPUT 100A short duration peak per channel Fuse protected
- HUM & NOISE 100dB below rated output 20Hz to 20kHz A weighted
- INPUT IMPEDENCE 47k ohms
- GAIN RCA Inputs: 32dB, Balanced Inputs: 38dB
- POWER/CURRENT CONSUMPTION 1400W, 4.8A (1100W) Class A Idle, 0.8A (184W) Class AB Idle/Standby
- DIMENSIONS, Height: 285mm (11.25”), Width: 510mm (20”), Depth: 550mm (21.75”), Weight: 57kg (125lbs)
FEATURES
CLASS A/CLASS AB OPERATION
In Class A distortion is minimised for ultimate sonic performance. In Class AB, performance is still exceptional but power consumption and heat output are reduced.
AMPLIFIER CONFIGURATION SELECTOR (ACS) SWITCH
The rear panel ACS switch allows for the amplifier to be configured for Stereo RCA, Bridged Mono RCA, Stereo XLR or Bridged Mono XLR modes. In Bridged Mono mode, the amplifier operates in true balanced configuration from input to output.
ECOLOGIC CONTROL
The amplifier can automatically switch from Class A to Class AB when unused after a listening session. This user adjustable feature is set to 30 minutes during manufacture and can also be switched off entirely.
REMOTE TRIGGER INPUT
When connected to a preamplifier trigger output, the amplifier will switch out of Mute and into Class A Mode ready for use when the preamplifier is taken out of standby.
GROUND LIFT SWITCH
This allows for the signal ground to be isolated from the main chassis earth. This can assist in resolving unwanted ground loops or hum due to duplicate ground paths in some systems.
WBT AND NEUTRIK CONNECTORS
High quality WBT RCA and Neutrik XLR input connectors are fitted along with WBT output speaker terminals to ensure a low distortion interface between your cables and the amplifier.
AURICAP CAPACITORS
Audience AV supply the Auricap XO capacitors used in key areas of the circuit. The Auricap was chosen for its superior clarity and dynamic ability. SILTECH WIRING
Siltech premium ‘G7’silver/gold wire provides a perfect connection between components to give clear, fast and detailed presentation of the music signal.
ALUMINIUM CONSTRUCTION
The aluminium construction provides a rigid non-magnetic housing to eliminate unwanted magnetic fields that can interfere with the sensitive audio signals.